Views: 0 Author: Site Editor Publish Time: 2022-08-02 Origin: Site
1. For thin aluminum plates below 0.1mm, use a utility knife or a paper cutter, and it is easy to operate.
2. For the aluminum plate between 0.1mm-2mm, it is recommended to use a toothless saw, the cut aluminum plate is flush and flat, and it is not easy to produce scratches.
3. For aluminum plates above 2mm, use a large electric or hydraulic shearing machine.
Laser cutting is to irradiate the work piece with a focused high-power density laser beam, so that the irradiated material rapidly melts, vaporizes, ablates or reaches the ignition point open.
1） Thin cutting seam: The cutting seam of laser cutting aluminum plate is generally 0.1mm-0.2mm.
2）The cutting surface is smooth: the cutting surface of the laser-cut aluminum plate has no burrs and no slag.
3） Small thermal deformation: The laser processing of laser processing has thin slits, high speed and concentrated energy, so the heat transmitted to the material to be cut is small, and the deformation of the material is also very small.
4）Material saving: laser processing adopts computer programming, laser equipment can cut different shapes of aluminum plate processing parts, improve the material utilization rate of aluminum plates, and save a lot of material costs.
5） The thickness of the aluminum plate that can be cut mainly depends on the power of the laser generator. Generally, the maximum thickness of 6000W can be cut to 16mm, and the thickness of 4500W can be cut to 12mm.
The aluminum plate is a highly reflective material, which will cause great damage to the laser! Generally, it is not recommended that customers use a fiber laser cutting machine to cut the aluminum plate, and use it as little as possible!